|Place of origin||Soviet Union|
|Used by||Communist forces|
|Manufacturer||Izhevsk Mechanical Plant (USSR/Russia), Ernst Thaelmann (Germany), Arsenal AD (Bulgaria), Norinco (China)|
|Weight||730 g (26 oz)|
|Length||161.5 mm (6.34 in)|
|Barrel length||93.5 mm (3.83 in)|
|Width||29.4 mm (1.16 in)|
|Muzzle velocity||315 m/s (1,033 ft/s)|
|Effective range||50 m (54.7 yd)|
|Feed system||8-round detachable box magazine (10- and 12-round available on some special Russian models)|
|Sights||Blade front, notch rear (drift adjustable)|
The PM (Russian: Пистолет МакароваScript error, Pistolet Makarova, literally Makarov's Pistol) is a semi-automatic pistol design. Under the project leadership of Nikolay Fyodorovich Makarov, it became the Soviet Union's standard military side arm from 1951-1991.
The Makarov pistol resulted from a design competition for replacing the Tokarev TT-33 semi-automatic pistol and the Nagant M1895 revolver. Rather than building a pistol to an existing cartridge in the Soviet inventory, Nikolai Makarov utilized essentially the "9mm Ultra" cartridge which had been designed by Carl Walther G.m.b.H. for the German Luftwaffe during the Second World War. Walther's cartridge became the 9x18mm Makarov. For simplicity and economy, the Makarov pistol was of straight blowback operation, with the 9x18mm cartridge being the most powerful cartridge it could safely fire. Although the nominal caliber was 9.0mm, the actual bullet was 9.22mm in diameter, being shorter and wider and thus incompatible with pistols chambered for 9x19mm Parabellum cartridges. Consequently, Soviet ammunition was unusable in NATO firearms, and in the event of war NATO forces would be unable to use ammunition from Soviet sources.
In 1951, the Pistol of Makarov (PM) was selected because of its simplicity (few moving parts), economy, easy manufacturing, and reasonable stopping power. It remained in wide front line service with Soviet military and police until the end of the U.S.S.R. in 1991 and beyond.
The Pistol Makarov (PM) is a medium-size, straight blowback action, frame-fixed barrel handgun. In blowback designs, the only force holding the slide closed is that of the recoil spring; upon firing, the barrel and slide do not have to unlock, as do locked-breech design pistols. Blowback designs are simple and more accurate than designs using a recoiling, tilting, or articulated barrel, but they are limited practically by the weight of the slide. The 9x18mm cartridge is a practical cartridge in blowback-operated pistols; producing a respectable level of energy from a gun of moderate weight and size. The PM is heavy for its size by modern US commercial handgun standards, largely because in a blowback pistol the heavy slide provides greater inertia to delay opening of the breech until internal pressures have fallen to a safe level. Other, more powerful cartridges have been used in blowback pistol designs, but the Makarov is widely regarded as particularly well balanced in its design elements. The Astra 600, chambered for 9mm Parabellum is a much older blowback pistol design than the Makarov, and fired a much more powerful cartridge. The US firm HiPoint currently manufactures large, heavy blowback pistols in even more powerful chamberings, including the .45 ACP.
The PM has a free-floating firing pin, with no firing pin spring or firing pin block. This allows for the possibility of accidentally firing if the pistol is dropped on its muzzle. Designer Makarov thought the firing pin of insufficient mass to constitute a major danger. The Makarov is notable for the safety elements of its design, with a safety that simultaneously blocks the hammer from contacting the firing pin and returns the weapon to the long-trigger-pull mode of double action when that safety is engaged. This is one of number of different types of safety mechanism generally referred to as "manual safety" in order to distinguish it from safeties that are disengaged by the user in the course of firing a gun without manipulation of separate safety controls. This type safety in the form of a slide mounted lever has some safety advantages points that the extra step to operate it may be of benefit in certain situations, although there is an argument over whether if that extra stop can also be a risk. The extra manipulation requirement can be a risk, especially when the slide mounted lever type is not positioned in ergonomic manner. Small Walther pistol(such as PPK) is one example of the case, and Makarov is very similar in configuration with such pistols.
When handled properly, the Makarov has excellent security against the possibility of accidental discharge caused by inadvertent pressure placed upon the trigger (such as in the acts of carrying the weapon in dense brush or re-holstering it). The Bulgarian-model Makarov is even government-approved for sale in the U.S. state of California, having passed a state DOJ-mandated drop-safety test. The PM's notable features are its simplicity and economy of parts; many do more than one task, e.g. the trigger guard is also the take down lever, the one piece slide stop is also the ejector and the sear spring also is the slide stop (and ejector) return spring. Similarly, the mainspring powers the hammer, and the trigger, while its lower end is the heel (European) style magazine catch. Makarov pistol parts seldom break with normal usage, and are easily replaced using few tools.
In addition to simplicity, the pistol is, unlike the TT-33, easily field stripped and reassembled (including removing the firing pin) without any tools; no more than a minute is required.
The Makarov has a DA/SA (double-action, single-action) operating system. After loading and charging the pistol by pulling back the slide, it can be carried with the hammer down and the safety engaged. To fire, the slide-mounted safety lever is pushed down to the "fire" position, after which the shooter squeezes the trigger to fire the gun. The action of squeezing the trigger for the first shot also cocks the hammer, an action requiring a long, strong squeeze of the trigger. The firing and cycling of the action re-cocks the hammer for subsequent shooting; fired single action with a short, light trigger squeeze. The PM's operation is semi-automatic, firing as quickly as the shooter can squeeze the trigger. Spent cartridges are ejected to the shooter's right and rear, some 18–20 feet away. When the safety is engaged,the hammer drops from the cocked position. The safety lever has a notch that blocks the hammer from striking the firing pin. This is the only safe way to lower the hammer.
The PM's standard magazine holds 8 rounds. After firing the last round, the slide locks open. After inserting a loaded magazine, the slide is closed by activating a lever on the left side of the frame or by withdrawing it to release the slide catch; either action loads a cartridge to the chamber.
When engaged, the PM's safety lever switch blocks the hammer from striking the rear end of the firing pin. The magazine release is on the heel of the handgrip. This is designed to avoid its snagging in clothes, and the accidental, premature release of the magazine.
The Makarov was manufactured in several communist countries during the Cold War and afterwards; apart from the USSR itself, they were East Germany, Bulgaria, China and post-unification Germany, which also found itself with several thousand ex-GDR Makarov pistols.
A silenced version of the Makarov, the PB, was developed for use by reconnaissance groups and the KGB, with an integral suppressor.
- The History and Development of Imperial and Soviet Russian Military Small Arms and Ammunition 1700-1986 written by Fred A. DATIG (Handgun Press - 1988)
- Script error
- ↑ Makarov.com, Makarov Basics, http://www.makarov.com/makbasics.html, retrieved 2008-01-27
- ↑ world.guns.ru, Modern Firearms - Makarov PM, http://world.guns.ru/handguns/hg21-e.htm, retrieved 2008-01-27
- ↑ www.saami.org, Unsafe Arms and Ammunition combinations, http://www.saami.org/Unsafe_Combinations.cfm, retrieved 2008-03-29
- ↑ The Gun Digest Book of Combat Handgunnery 6th Edition, Massad Ayoob