Vietnam War
Register
Advertisement
Machine Gun, 7.62 mm, M60
M60
M60 machine gun
Type General-purpose machine gun
Place of origin United States
Service history
In service 1957–present
Used by Anti-communist forces
Wars Vietnam War
various others
Production history
Designed Late 1940s–1957
Manufacturer Saco Defense
U.S. Ordnance
Unit cost $6,000[1]
Produced 1957–present
Variants See Variants
Specifications
Weight 10.5 kg (Script error: No such module "Math". lb)
Length 1,105 mm (Bad rounding hereScript error: No such module "Math". in)
Barrel length 560 mm (Script error: No such module "Math". in)

Cartridge 7.62×51mm NATO
Caliber 7.62 mm (0.308 in)
Action Gas-operated, short stroke gas piston[2], open bolt
Rate of fire 500–650 rounds/min (rpm)
Muzzle velocity 2,800 ft/s (853 m/s)
Effective range 1,200 yd (1,100 m)
Feed system Disintegrating belt with M13 Links
Sights Iron sights

The M60 (formally named United States Machine Gun, Caliber 7.62 mm, M60) is a family of American general-purpose machine guns firing 7.62×51mm NATO cartridges from a disintegrating belt of M13 links. There are several types of live ammunition approved for use in the M60, including ball, tracer, and armor-piercing rounds.[1]

Introduced in 1957, it has served with every branch of the U.S. military and still serves with other armed forces. Its manufacture and continued upgrade for military and commercial purchase continues into the 21st century, though it has been replaced or supplemented in most roles by other designs, notably the M240 in U.S. service.[3]

Overview[]

The M60 is a belt-fed machine gun that fires the 7.62 mm NATO cartridge (.308 Winchester) commonly used in larger rifles. It is generally used as crew-served weapon and operated by a team of two or three individuals. The team consists of the gunner, the assistant gunner (AG in military slang), and the ammunition bearer. The gun's weight and the amount of ammunition it consumes when fired make it difficult for a single soldier to carry and operate. The gunner carries the weapon and, depending on his strength and stamina, anywhere from 200 to 1000 rounds of ammunition. The assistant carries a spare barrel and extra ammunition, and reloads and spots targets for the gunner. The ammunition bearer carries additional ammunition and the tripod with associated traversing and elevation mechanism, if issued, and fetches more ammunition as needed during firing.

DF-ST-90-04665

Firing an M60 machine gun from the standing position during the DEFENDER CHALLENGE '88 competition

The M60 can be accurately fired at short ranges from the shoulder thanks to its design. This was an initial requirement for the design and a hold-over in concept from the M1918 Browning Automatic Rifle. It may also be fired from the integral bipod, M122 tripod, and some other mounts.

M60 ammunition comes in a cloth bandolier containing a cardboard box of 100 pre-linked rounds. The M60 changed from M1 link to the different M13 link, a change from the older link system with which it was not compatible. The cloth bandolier is reinforced to allow it to be hung from the current version of the feed tray. Historically, units in Vietnam used B3A cans from C-rations packs locked into the ammunition box attachment system to roll the ammunition belts over for a straighter and smoother feed to the loading port to enhance reliability of feed. The later models changed the ammunition box attachment point and made this adaptation unnecessary.

History[]

The M60 machine gun began development in the late 1940s as a program for a new, lighter 7.62 mm machine gun. It was derived from German machine guns of World War II (most notably the FG 42 and to a lesser extent the MG 42),[4] but it contained American innovations as well. Early prototypes, notably the T52 and T161 bore a close resemblance to both the M1941 Johnson machine gun and the FG-42.[5] The final evaluation version was designated the T161E3. It was intended to replace the M1918 Browning Automatic Rifle and M1919A6 Browning machine gun in the squad automatic weapon role, and in the medium machine gun role. One of the weapons tested against it during its procurement process was the FN MAG.

T44

The experimental T-44 machine gun developed from the German FG 42 and MG 42 machine guns.

The U.S. Army officially adopted the T160E3 as the M60 in 1957.[6] It later served in the Vietnam War as a squad automatic weapon with many U.S. units. Every soldier in the rifle squad would carry an additional 200 linked rounds of ammunition for the M60, a spare barrel, or both. The up-gunned M113 armored personnel carrier ACAV added two M60 gunners beside the main .50 caliber machine gun, and the Patrol Boat, River had one in addition to two .50 cal mounts.

Soldiers Laying Down Covering Fire

M60 in Vietnam, 1966

During the Vietnam War, the M60 received the nickname "The Pig" due to its size.[7]

In the 1980s, the M60 was partially replaced by the M249 Squad Automatic Weapon within the infantry squad. The M60 was retained in the vehicle-mounted role and the general-purpose role due to its greater power and range compared to the 5.56 mm M249. In the United States Marine Corps service, concerns about the M60's reliability, weight, and the high round counts of many M60s in service prompted the adoption of the M60E4 (or also known as MK43MG) to replace most original M60s in infantry units.

Spops2004afghanm60

A 19th Special Forces Group soldier mans an M60 machine gun on a Humvee in Afghanistan in March 2004. An AT4 anti-tank launcher can be seen in the foreground.

Starting with Ranger Battalions, the US Army began adopting and modifying M240 variants to replace their remaining M60s in the early 1990s. The M240 is several pounds heavier than the M60, and has a longer barrel and overall length, but is more reliable in use and testing. However, the M60 uses a much simpler gas system that, when care is taken during reassembly, is easier to clean. This advantage is obviated by the fact that the gas tube is wired shut with lockwire to prevent the weapon from disassembling itself due to vibration in hard use.

M60E3 live fire excersise

A sailor fires an M60E3 machine gun during a live-fire exercise at the Mobile Inshore Underwater Warfare Site (MIUW) at Guantanamo Bay, Cuba.

The M60 continues to be used in the 21st century by U.S. Navy SEALs and as a door gun on U.S. Army helicopters, and was the main 7.62 mm machine gun by some U.S. special operations forces to the late 1990s. As of 2005, it is used by the Coast Guard, Navy, and some reserve units, though it is being phased out in favor of the M240 7.62 mm medium machine gun. Its use as an Army helicopter door gun will soon taper off, as an improved M240 version has been adopted for this role.

Design[]

The M60 is a gas-operated, air-cooled, belt-fed, automatic machine gun that fires from the open-bolt position and is chambered for the 7.62 mm NATO cartridge. Ammunition is usually fed into the weapon from a 100-round bandolier containing a disintegrating, metallic split-link belt.

Thomas with M60 Machine Gun

An Airwoman of the UK's Royal Air Force handles an M60 during a demonstration for Combined Joint Task Force Exercise (CJTFEX) in 2004.

The design drew on many common concepts in firearms manufacture of the period, such as stamped sheet metal construction, belt feed (a modified mechanism for belt feed from the MG42 with a single pawl), quick barrel replacement, a pistol grip and stock, and a Semi bullpup design similar to the FG42 (much of the action occupies the weapon's stock). The M60's operating system of an operating rod turning a rotating bolt was inspired by the FG42, which was based on the much earlier Lewis Gun. The M60's gas operation is unique, and drew on technical advances of the period, particularly the White "gas expansion and cutoff" principle also exploited by the M14 rifle. The M60's gas system was simpler than other gas systems and easier to clean.

The straight-line layout allowed the operating rod and buffer to run directly back into the buttstock and reduce the overall length of the weapon.

As with all such weapons, it can be fired from the shoulder, hip, or underarm position. However, to achieve the maximum effective range, it is recommended that a bipod-steadied position or a tripod-mounted position be used and fired in bursts of 3–5 rounds. The weapon is heavy and difficult to aim when firing without support, though the weight helps reduce the felt recoil. The large grip also allowed the weapon to be conveniently carried at the hip. The gun can be stripped using a live round of ammunition as a tool. However, this is highly discouraged, as doing so can damage that round and increase the chance of a misfire.

The M60 is often used with its own integrated bipod or with the M122 tripod. The M60 is considered effective up to 1,100 meters when firing at an area target and mounted on a tripod; up to 800 meters when firing at an area target using the integral bipod; up to 600 meters when firing at a point target; and up to 200 meters when firing at a moving point target. The United States Marine Corps doctrine holds that the M60 and other weapons in its class are capable of suppressive fire on area targets out to 1,500 meters if the gunner is sufficiently skilled.

Originally an experimental M91 tripod was developed for the M60, but an updated M2 tripod design was selected over it which became the M122. The M122 would be itself replaced in the 2000s (decade) by a new mount, in time for the M60 to also be used with it.

Ammunition[]

M60firingfromboat1

M60 machine gun fired during a small arms familiarization exercise aboard USS Blue Ridge (LCC-19); November 2004

M60 machine gun DA-ST-92-07295

A member of the 810th Military Police Company mans a 7.62 mm M60 machine gun atop an M998 Humvee during Operation Desert Shield.

The M60 family of weapons are capable of firing standard NATO rounds of the appropriate caliber. Most common in U.S. use are M61 Armor piercing, M62 Tracer, and M80 Ball. For training purposes, M63 Dummy and M82 Blanks are used. The new tungsten cored M993 Armor-piercing rounds may also be fired in the M60 as well, though they did not enter the inventory until after the M60 was withdrawn from service in active-duty units.

When firing blanks, the M13 or M13A1 blank-firing adaptor (BFA) is necessary in order to produce enough gas pressure to cycle the weapon with blanks. All ammunition must be fixed in a NATO standard M13 disintegrating metallic split-link belt to feed into the weapon.

The standard combat ammunition mix for the M60 consists of four ball (M80) cartridges and one tracer (M62) in belts of 100 rounds. The four to one ratio theoretically allows the gunner to accurately "walk" the fire into the enemy. Tracer bullets do not fly quite the same trajectory as ball and the weapon's sights must be used for accurate fire—particularly at ranges in excess of 800 meters, where 7.62x51mm NATO tracer bullets usually burn out and are no longer visible. This is a problem for all weapons in this caliber using this tracer round.

Design flaws[]

M60closeup2002

An M60 machine gun aboard a Navy patrol craft.

When tested in the field, the M60 was fairly effective, but in the jungles of Southeast Asia in which it was soon used, the initial versions displayed several potential problems when used on the ground. A common complaint was the weapon's weight, though M60 was among the lightest 7.62 mm machine guns of the era.

For units in Vietnam, the single most common complaint was that the M60 was comparatively unreliable and prone to jamming and other malfunctions, especially when it was dirty. Fine sand and dust in the mechanism could bring the M60 to a halt. This was a major factor in the Israeli Defense Force declining to adopt the M60 in favor for the FN MAG. The weapon was more difficult to clean and maintain than the M1918A2 Browning Automatic Rifle (BAR) it replaced in the squad. In normal conditions it would often fire thousands of rounds without a serious jam, while field conditions tended to reduce reliability without proper maintenance.

The safety was awkward to operate and worked the "wrong way" for soldiers who were trained with the M16 rifle and M1911A1 pistol—that is, it required an upward movement of the thumb on the safety catch to make the gun ready to fire, rather than a downward movement as with the other weapons. Additionally, it is possible to install parts of the fire control mechanism incorrectly, causing a "runaway gun"—meaning that it would keep firing until empty even if the operator took his finger off the trigger.[8] The gas system of the original model could be assembled incorrectly causing failure to function and could unscrew and come apart if not safety wired in place.

M60maintenance2002

A Gunner’s Mate 3rd Class in the process of preventative maintenance and cleaning on an M60 machine on the USS Constellation; December 2002

The M60 sometimes (depending on the version) tore rims off of fired cartridge cases during the extraction cycle, resulting in failure to remove the empty case, causing a jam that could take time to clear. The barrel latch mechanism (a swinging lever) could catch on the gunner's equipment and accidentally unlatch, causing the barrel to fall out of the gun. The lever was replaced with a push button mechanism that was less likely to be accidentally released, but many of the swinging-lever latches are still on guns in inventory, forty years after this problem was discovered.

The grip/trigger housing assembly is held in place with a rather fragile leaf spring clip instead of the captive pins used in other designs. The spring clip has been known to be prone to breakage since the first trials at Aberdeen Proving Ground. Duct tape and cable ties have been seen on M60s in the field, placed there by their crews in case the spring clip breaks. The sear in the trigger mechanism gained a reputation for wearing down and a malfunction could cause the gun to "run away".[9] A second sear notch was eventually added to the operating rod to reduce the chance of this happening.

Several critical parts of early production M60s, such as the receiver cover and feed tray, were made from very thin sheet metal stampings and prone to bending or breaking; sturdier parts were eventually available in the early 1970s. Early M60s also had driving spring guides and operating rods that were too thin and gas pistons that were too narrow behind the piston head (part of an attempt to save weight), leading to problems with breakage. Metallurgical problems also played a part, (blamed by some on low-bid contractors), but after 1970 a slightly heavier part was designed and slowly put into the supply chain. High-round-count weapons were also susceptible to stretching of the receiver and other parts.

M60 machine gun barrel change DF-ST-90-04667

An M60 machine gun team changes barrels before engaging their last target during the DEFENDER CHALLENGE '88 competition.

Another criticism with some versions of the M60 is that the barrel was heavy. The bipod was a permanent fixture to the barrel as well as the gas chamber of the gas system; the latter was a result of using a piston design with a fixed regulator design. The advantage of the fixed regulator was no adjustment was required, though it risked the ability to compensate for fouling of the gas system, leading to insufficient power to operate the action, including lifting the ammunition belt. The non-adjustable front sight is fixed to the barrel, and adjustments for "zeroing" the sights could only be made at the rear sight, requiring readjustment when the barrel is changed—not ideal for combat situations. The bipod being attached to the barrel also meant that the weapon had to be put down on the ground for a barrel change, complicating the process unnecessarily, especially in combat conditions.

There was no handle to hold the barrel by for changes. A large asbestos glove was part of the standard-issue to allow the crew to handle hot barrels during barrel change. Loss of the glove was always a problem.[8]

U.S. Marines especially disliked the M60, and many Marine units held onto their BARs until 1967–68 officially, and longer unofficially. The M60E3 variant designed in the mid-1980s for the U.S. Marine Corps reduced the design's weight to 18.9 lb (8.61 kg) unloaded and slightly improved reliability. Users complained about the quickly overheating barrel, a common problem with the original M60. This problem was aggravated in the M60E3, which uses a lighter barrel, which required changing every 100 rounds instead of every 200. The M60E3's barrel used a wire-and-plastic handle near the breech end and could be changed safely without the use of heat-resistant mittens.

The U.S. Navy special operations forces continued to use the M60E3 for years because of its portability and low weight for its caliber, with a number of upgrades, including a change in feed system and barrel configuration. Additional required changes were the addition of rails for optical sights and other modern accessories.

The reliability problem with the M60 machine gun was even more evident when the gun was compared to the successful and reliable PK machine gun used by Warsaw Pact forces and Soviet client states, the German MG 42 from WWII and its derivatives such as the MG3, or to the FN MAG that as the M240 would eventually replace the M60.

Variants[]

M60 101st Airborne Division Exercise 1972

A member of the 101st Airborne Division, armed with an M60 machine gun, participates in a field exercise in 1972.

The nomenclature M60 describes either the first adopted version or, generically, the family of weapons derived from it.

Major variations include the M60E1 (an improved version that did not enter production), the M60E2 (a version designed to be used from fixed mounts as a co-axial for armored vehicles or in helicopter armament systems), the M60E3 (a lightweight version) and the M60E4 (another improved version, designated Mk 43 Mod 0 by the U.S. Navy).

The M60C was adopted for use on fixed mounts on aircraft. It was characterized by the use of an electric solenoid to operate the trigger and a hydraulic system to charge the weapon. The M60D differed from the base model by employing spade grips, a different sighting system, and lacking a forearm. It was typically employed as a door gun on helicopters or as a pintle-mounted weapon as on the Type 88 K1 tank.

There are many smaller variants among each type, between makers of the firearm, and over time.

Variant summary[]

  • T161: The M60's developmental designation before it was type-classified in the 1950s.
  • M60: The basic model, type-classified in 1957.
  • M60E1: An improved version that did not enter production. The primary difference was the handle fixed to the barrel and the removal of the gas cylinder and bipod from the barrel assembly.
  • M60E2: Used in vehicles as a coaxial machine gun; electrically fired.
  • M60B: Used in helicopters in the 1960s and 1970s; unmounted.
  • M60C: Used in fixed mounts in aircraft in the 1960s and 1970s; electrically fired and hydraulically charged.
  • M60D: Replaced the M60B; a pintle-mounted version used especially in armament subsystem for helicopters, but also some other roles.
  • M60E3: An updated, lightweight version adopted in the 1980s.
  • M60E4 (Mk43 Mod 0/1): An improved model of the 1990s that looks similar to the E3, but has many improvements. It has subvariants of its own, and is also used by the U.S. Navy (as the Mk 43 Mod 0/1). The Mk 43 Mod 1 is a specialized version with additions such as extra rails for mounting accessories.

M60[]

M60 machine gun

M60 on the deck of USS Theodore Roosevelt (CVN-71) in 2006

The initial version was officially adopted by the U.S. Army in the late 1950s, though at this time it was only intended for the infantry. It was known as the T161 before it was adopted (specifically the T161E3), and was chosen over the competing T52 during testing in the 1950s. They both used a similar feed and were both gas-operated, but the T161 was easier to produce and its different internals performed better. The model that won the competition was the T161E3.

The model was type-classified in 1957, and entered production. It saw its first heavy use in the 1960s. The basic design has undergone some smaller changes, and has been produced by different manufacturers.

M60E1[]

The M60E1 was the first major variant of the original M60. It did not go into full-scale production, though many of its features were included into the later E3 and E4 variants. Some of its features were also incorporated into the existing M60 production. This mainly changed how the gas cylinder, the barrel, and the bipod were connected; in the first iteration. The M60 and the M60E1 are two different versions. Opinions are varied on whether the M60E1 was officially adopted or not.

M60 machine gun DA-ST-84-04992

A camouflaged infantryman armed with an M60 machine gun

One of the more noticeable changes on the M60E1 is that the bipod attachment point was moved to the gas tube rather than the barrel (like on the later M60E3). It did not, however, have a forward pistol grip, as was added on the E3.

M60E2[]

Us m60e2 01

M60E2, intended for co-axial use. Note gas tube extension and no grip.

The M60E2 is used on armored fighting vehicles, such as the M48A5, later M60 Patton versions and the K1 Type 88. It lacks many of the external components of the standard M60, including stock and grips. The M60E2 was electrically fired, but had a manual trigger as a backup, as well as a metal loop at the back for charging. The gas tube below the barrel was extended to the full length of the weapon to vent the gas outside the vehicle. This version achieved a mean time between failures of 1,669 during testing in the 1970s, more frequent than the FN MAG, which was adopted in 1977 as a co-axial vehicle gun and designated the M240.

The M60E2 is used on the South Korea's K1 Type 88 tank as a co-axial weapon, along with an M60D on a pintle mount.

M60B[]

The M60B was a short-lived version designed to be fired from helicopters, with limited deployment made in the 1960s and 1970s. It was not mounted, just held, and was soon replaced by the pintle-mounted M60D. The 'B' model differed most noticeably in that it had no bipod and featured a different rear stock than the regular model. It still had a pistol grip (as opposed to spade grips). The M60B's advantage over pintle-mounted variants was that it had a wider and much less restricted field of fire.

M60C[]

M60cmg

The M60C machine gun

The M60C is a variant of the standard M60 for aircraft-mounting, such as in helicopter armament subsystems. It lacks things like the bipod, pistol grip, and iron sights. The main difference between the standard M60 and the "C" variant is the electronic control system and the hydraulic swivel system used. It could be fired from the cockpit by the pilot or co-pilot. It is an electronically controlled, hydraulic-powered, air-cooled, gas-operated, belt-fed weapon system. It used the M2, M6, and M16 armament subsystems and was mounted on the OH-13 Sioux, the OH-23 Raven, the UH-1B Huey, and comprised the standard fixed armament of the OV-10 Bronco. M60C production was on the order of several hundred. It was also used in the XM19 gun pod.

M60D[]

M60d-on-m23

The M60D on the M23 Armament Subsystem

The M60D is a mounted version of the standard M60. It can be mounted on boats, vehicles and as a pintle-mounted door gun in helicopters. When used in aircraft, it differs from the M60C in that it is not controlled by the pilot—rather, it is mounted in a door and operated by a member of the crew. Like the rest of the M60 family, it is an air-cooled, gas-operated, belt-fed weapon. Unlike other models, however, the M60D normally has spade grips and an aircraft ring-type sight or similar, as well as an improved ammunition feed system. A canvas bag is also affixed to the gun to capture ejected casings and links, preventing them from being sucked into the rotor blades or into an engine intake. The M60D was equipped on the UH-1B Huey (using the M23, XM29, M59, and the Sagami mounts), the CH-47 Chinook (using the M24 and M41 mounts) in both door and ramp locations, the ACH-47A "Guns-A-Go-Go" variant of the Chinook (using the XM32 and XM33 mounts), and on the UH-60 Black Hawk (using the M144 mount). The M60D is also used by the British on Royal Air Force Chinooks. In US service, the M60D has been primarily replaced by the M240H. The M60D is still manufactured by U.S. Ordnance and still used on the SH-60 Seahawk.

M60E3[]

M60 machine gun DN-ST-88-00621

Navy SEAL team member fires an M60E3 from the shoulder during a field training exercise in 1987

The M60E3 was fielded c. 1986 in an attempt to remedy problems with earlier versions of the M60 for infantry use. It is a lightweight, "improved" version intended to reduce the load carried by the gunner. Unlike its predecessors, the M60E3 has several updated modern features. It has a bipod (attached to the receiver) for improved stability, ambidextrous safety, universal sling attachments, a carrying handle on the barrel, and a simplified gas system. However, these features also caused almost as many problems for the weapon as they fixed. There were different types of barrels used, but the lightweight barrel was not as safe for sustained fire at 200 rounds per minute as heavier types. However, some personnel claim to have witnessed successful prolonged firing of the weapon. The stellite superalloy barrel liner makes it possible, but the excessive heat generated by this process can quickly make the gun unusable. There were two main barrels, a lightweight barrel and another heavier type—the former for when lighter weight was desired, and the latter for situations where more sustained fire was required.

M60 machine gun DM-ST-90-01312

M60E3.

The reduced-weight components also reduced the durability of the weapon, making it more prone to rapid wear and parts breakage than the original. Most infantry units in the U.S. Army and Marine Corps have now switched over to the M240 as their general-purpose machine gun, which is more reliable (particularly when dirty) and seems to be well liked by the troops for its ruggedness, despite the fact that it weighs 27.6 lb (12.5 kg) compared to the standard M60 at 23.15 lb (10.5 kg).

The U.S. Air Force Security Forces received the M60E3 from 1988 to 1989. All USAF M60E3s were withdrawn from general issue by 1990, because it did not meet the vehicle mount requirements of the Cadillac Gage Ranger and due to overheating problems. The M60E3 did remain in the Air Force as an emergency issue weapon only. The Air Force cut the barrel change times, sustained fire 100 rounds per minute change barrel every 10 minutes (M-60) to 5 minutes (M-60E3), and rapid fire 200 rounds per minute change barrel every 5 minutes to 2 minutes.

M60E4/Mk43 Mod 0/1[]

The Mk43/M60E4 General Purpose Machine Gun (GPMG) is a 7.62 mm NATO light machine gun. Evolved from the M60 Series of machine guns, it has several improvements over the originals. The Mk43/M60E4 Series includes the Mod 0 and Mod 1 configurations.

The Mk43/M60E4 is effective against infantry, unarmored or lightly armored vehicles and boats. It is the primary light machine gun used in the United States, other NATO countries and U.S. government-approved countries. The Mk43 machine gun currently is manufactured solely by U.S. Ordnance (USORD). USORD has produced it since 2000.

This firearm is the most modernized and latest in the generations of the old M60 family and incorporates a number of improvements over past versions. Externally, it looks somewhat like the M60E3, but it has many internal changes and improvements that modernize the effectiveness and reliability of this weapon, in general it is a more reliable weapon than all previous M60s. Externally, It features a different forward grip, iron sights, butt stock and bipod. The M60E4/MK 43 has higher pull for the belt, and is available in a variety of configurations. Older M60 models can be upgraded with a conversion kit manufactured by U.S. Ordnance to the M60E4/MK 43. The M60E4/MK 43 were primarily developed in the 1990s and have continued to be redeveloped in the 2000s (decade). Early MK 43s had some distinct differences from the E4 (such as a duckbill flash suppressor), though by the 2000s (decade) these distinctions seemed to have ended.

M60iraq2003

A mounted MK 43 Mod 0 (M60E4) (later model) is crewed by a Seabee of NMCB-15 (Naval Mobile Construction Battalion), on a convoy in Iraq in May 2003.

The Navy has designated this weapon as the MK 43 Mod 0. It was developed for the U.S. Navy SEALs to replace their existing stock of M60E3 machine guns fitted with shorter "assault barrels". These weapons are identical to standard M60E4s, with the exception of the barrel length, and can be used either as suppressive fire or direct fire weapons. The MK 43 Mod 1 adds significantly more rail attachment points to the weapon's receiver cover and handguard.

U.S. Ordnance website states in their FAQ, as of 2005, that the "M60E4 and the MK 43 are the same weapon system". The M60E4 and MK 43 versions in the past were roughly similar, although they are part of the same family. While it might be fair to say that the Mk 43s are a type of M60E4, there are technical differences between any given M60E4 model. Early MK 43s have certain differences over M60E4 from the same period, the most obvious being the duck-bill flash hider and different handguard. This difference is no longer seen on the current MK 43s still manufactured by U.S. Ordnance.

In Army trials during the 1990s the M60E4 produced by Saco Defense was pitted against the (then called) M240E4 produced by FN for a new medium machine gun to be used by the infantry. The competition was to replace the decades-old M60s. The M240E4 won, and was then classified as the M240B. While the M240B had been more reliable in the tests, it was noted to be a heavier weapon than the M60E4.

The M60E4/MK 43 is a modern update to the entire series, such that it is also available in many of the previous configurations, such as a co-axial weapon. Kits are offered to convert older models to the E4 standard.

  • M60E4 (Light machine gun):
    • Short barrel: weight: 22.5 lb (10.2 kg); length: 37.7 in (95.8 cm)
    • Long barrel: weight: 23.1 lb (10.5 kg); length: 42.4 in (108 cm)
    • Assault barrel: weight: 21.3 lb (9.66 kg); length: 37.0 in (94.0 cm)
    • Width: 4.8 in (12.2 cm)
  • M60E4 (mounted):
    • Length: 43.5 in (110 cm)
    • Width: 5.9 in (15.0 cm)
    • Weight: 22.7 lb (10.3 kg)
  • M60E4 (co-axial):
    • Length: 42.3 in (107 cm)
    • Width: 4.8 in (12.2 cm)
    • Weight: 21.2 lb (9.62 kg)

Design details[]

The Mk43/M60E4 is a gas-operated, disintegrating-link, belt-fed, air-cooled machine gun that fires from an open bolt. It is the newest, upgraded version of the M60 Series machine guns.[10]

The Mk43/M60E4 fires a 7.62 x 51 mm NATO cartridge, which offers accuracy, reliability, and stopping power. It fires at a cyclic rate of 500 to 600 rounds per minute, with an effective distance of 1200 yards (1100 meters). The weapon’s controllable, yet lethal, rate of fire allows for accurate firing in the offhand, kneeling and prone positions.

The machine gun’s light weight—20 to 21 pounds (9 to 10 kilograms)—and compact design make it easy to carry long distances and maneuver in tight spaces. It also allows for the weapon to be fired offhand (shouldered) accurately.

The M60E4/Mk43 Mod 0, typically used as an infantry machine gun, features an injection-molded composite handguard. The weapon system’s quick-change barrel is crucial for safety and efficiency, particularly when the operator is under fire. With the lightweight bipod mounted to the receiver, the barrel can be changed without removing the bipod.

The Mk43/M60E4 Mod 1 has multiple M1913 rail mounting points for mounting optics, aiming lasers, and accessories for around-the-clock capability. It mounts directly or adapts to all standard NATO tripod and vehicle mounts.

Barrels are Stellite lined for sustained fire and extended life. They are available in short, long and heavy fluted configurations for use in various applications. All major components of the Mk43/M60E4 directly interchange with other M60 configurations. U.S. Ordnance manufactures a conversion kit that upgrades older M60s to its Mk43/M60E4 model.

Source: U.S. Ordnance Spec Sheets

5.56mm derivatives[]

Scaled down derivatives of the M60 machine gun also existed as the Ford Aerospace XM234 and Rodman Laboratories XM235 as a replacement for the M1918 Browning Automatic Rifle. Both weapons lost to the FN Minimi.

See also[]

M60 machine gun DF-SD-04-09905

Airman with M60, assigned to the 52nd Security Forces Squadron (SFS), at Spangdahlem Air Base (AB), Germany.


References[]

  1. 1.0 1.1 The M60. Federation of American Scientists.
  2. Script error: No such module "citation/CS1".
  3. Script error: No such module "citation/CS1".
  4. Weapons: An International Encyclopedia From 5000 B.C. To 2000 A.D. Diagram Visual, p. 217. ISBN 0-312-03950-6.
  5. http://www.globalsecurity.org/military/systems/ground/m60mg-pics.htm
  6. "Army's Newest Machine Gun Shoots from the Shoulder." Popular Science, September 1957, pp. 122-123.
  7. Script error: No such module "citation/CS1".
  8. 8.0 8.1 The World Encyclopedia of Rifles and Machine Guns, p. 93
  9. The World Encyclopedia of Rifles and Machine Guns, pp. 93, 196
  10. Jane’s Infantry Weapons, Sept. 2009

External links[]

Advertisement