|Place of origin||Australia|
|Used by||See Users|
|Wars||Vietnam War</br>Rhodesia, Operation Agila|
|Manufacturer||Lithgow Small Arms Factory|
|Weight|| 3.7 kg (Empty) |
4.30 kg (Loaded)
|Barrel length||198 mm|
|Cartridge||9x19 mm Parabellum|
|Rate of fire||600-640 rounds/min|
|Effective range||150 m|
|Maximum range||100-200 m|
|Feed system||34-round Sterling SMG compatible box magazine|
|Sights||Offest Iron sights|
The 9 mm F1 was a standard Australian submachine gun manufactured by the Lithgow Small Arms Factory. First issued to Australian troops in July 1963, it replaced the Owen machine carbine. The F1 was retired in the early 1990s and replaced by the F88C Austeyr, an Australian-built version of the Steyr AUG rifle with slight modifications. The F1 had a robust and simple design and proved useful in close-quarter fighting during the Vietnam War. Malaysia bought a small number of the F1 but this only totaled 28 in number.
The F1 is a simple blowback design firing from an open bolt with a fixed firing pin. It shares many design features with the British Sterling submachine gun. Unlike both the Sterling and its predecessor, the Owen, the F1 has a removable wooden butt and pistol grip. A curved detachable 34 round box magazine is inserted in a magazine housing on top of the barrel, similar to the earlier and popular Australian Owen gun. The top mounted magazine is unobtrusive for carry and when lying prone. Lightning fast magazine changes can be made, it has the added advantage of only needing a light spring being no harder to load than a .22 magazine not requiring special mag fillers like its contemporaries and to be less likely to jam than a bottom mounted magazine. The butt-plate and pistol-grip are identical to those on the L1A1 SLR as well as the capability of adapting SLR bayonets.
The trigger is a two stage pull, half back semi auto, pull and hold back gives full auto requiring a safety catch only easily operated by the thumb. There is a small guard fitted forward of the ejection port to protect the forward hand. The left mounted cocking handle has a tab that when pressed locks into the bolt enabling it to be worked back and forward to clear fouling.
Stripping is simple, Safety on remove magazine, cock and hold bolt open rotate to left inspect bolt face and chamber, release bolt under control. Grab butt press catch on bottom of receiver with other hand rotate butt to left 90 deg pull off, remove spring, release safety tip barrel up pull trigger bolt slides out. Assemble in reverse. Suggested ranges for use were 25 meters from the hip snap shooting 100 meters using sights.
Ammunition 9mm x 19mm Luger/Para 115 grain Ball, Velocity 1250 feet per second. As a side item the same ammunition was used in the issue Browning Hi Power pistol
Because of the vertical magazine the sights of the F1 were offset to the right of the weapon requiring a slight head tilt to the right, the rear sight being a roughly triangular asymmetrical metal flap with a round aperture, the foresight being a blade mounted on the right side of the weapon's magazine well.
The Complete Equipment Schedule (CES) for the F1 included:
- a large round wire and nylon brush, similar to a bottle brush for cleaning the tubular body of the weapon
- a standard SLR pull-through (a string with a loop at one end for holding a piece of service flannelette and a weight at the other to assist the user in feeding it down the barrel)
- a sling similar to the standard brass and canvas SLR sling, but shorter
- 5 magazines and
- a 4 magazine pouch, each column having its own flap.
- Australian Service Machine Guns (Skennerton)
- S.A.I.S No.3, 9mm Owen & Austen MK I* (Skennerton)
- Various Factory Records, S.A.F. Lithgow
- Infantry Training Vol. 1, Infantry Platoon Weapons Pam.