| 7.62mm UKM | ||
|---|---|---|
| Type | Rifle | |
| Place of origin | Germany | |
| Service history | ||
| In service | Never issued | |
| Production history | ||
| Designer | Michael Uekötter | |
| Designed | 2002 | |
| Number built | small batch for C.I.P. registration | |
| Specifications | ||
| Parent case | .338 Lapua Magnum | |
| Case type | Rimless, bottleneck | |
| Bullet diameter | 7.82 mm (Script error: No such module "Math". in) | |
| Neck diameter | 8.68 mm (Script error: No such module "Math". in) | |
| Shoulder diameter | 14.06 mm (Script error: No such module "Math". in) | |
| Base diameter | 14.91 mm (Script error: No such module "Math". in) | |
| Rim diameter | 14.93 mm (Script error: No such module "Math". in) | |
| Rim thickness | 1.52 mm (Script error: No such module "Math". in) | |
| Case length | 57.00 mm (Script error: No such module "Math". in) | |
| Overall length | 79.00 mm (Script error: No such module "Math". in) | |
| Case capacity | 5.84 cm³ (90 gr H2O) | |
| Rifling twist | 250 mm (1-10") | |
| Primer type | Large rifle magnum | |
| Maximum pressure | 470.00 MPa (Script error: No such module "Math". psi) | |
| Ballistic performance | ||
| Bullet weight/type | Velocity | Energy |
| 155 gr (Script error: No such module "Math". g) Laupa Scenar BTHP | 3,468 ft/s (Script error: No such module "Math". m/s) | 4,141 ft·lbf (Script error: No such module "Math". J) |
| 168 gr (Script error: No such module "Math". g) Sierra BTHP | 3,300 ft/s (Script error: No such module "Math". m/s) | 4,062 ft·lbf (Script error: No such module "Math". J) |
| 181 gr (Script error: No such module "Math". g) RWS TUG | 3,240 ft/s (Script error: No such module "Math". m/s) | 4,219 ft·lbf (Script error: No such module "Math". J) |
| 185 gr (Script error: No such module "Math". g) Berger BTHP | 3,149 ft/s (Script error: No such module "Math". m/s) | 4,073 ft·lbf (Script error: No such module "Math". J) |
| 220 gr (Script error: No such module "Math". g) Sierra BTHP | 2,982 ft/s (Script error: No such module "Math". m/s) | 4,345 ft·lbf (Script error: No such module "Math". J) |
| Test barrel length: 27.5" (699 mm) Source(s): [1] | ||
The 7.62mm UKM (7.62 x 57 mm) is a specialized rimless bottlenecked centerfire cartridge developed for long-range rifles. The commercially successful .338 Lapua Magnum cartridge has functioned as the parent case for the 7.62mm UKM, which is essentially a necked-down shortened version of the .338 Lapua Magnum. The .338 cartridge case was used for this since it has the capability to operate with high chamber pressures which, combined with smaller and hence lighter bullets result in high muzzle velocities.
History[]
The 7.62mm UKM was developed by Michael Uekötter and C.I.P. (Commission Internationale Permanente pour l'Epreuve des Armes à Feu Portatives) certified in 2002, so it is an officially registered and sanctioned member of the Finnish "family" of super magnum rifle cartridges. The 7.62mm UKM is not commercially available today and currently (2008) exists only as a C.I.P. datasheet. It is however still used by a few shooters who produce the cases from .338 Lapua Magnum brass by reshaping the shoulder and neck, and handloading it with .30 calibre bullets.
Cartridge dimensions[]
The 7.62mm UKM has a 5.84 ml (90 grains) H2O cartridge case capacity. The exterior shape of the Lapua Magnum case was designed to promote reliable case feeding and extraction in bolt action rifles and machineguns alike, under extreme conditions.
7.62mm UKM maximum C.I.P. cartridge dimensions. All sizes in millimeters (mm).
Americans would define the shoulder angle at alpha/2 ≈ 20 degrees. The common rifling twist rate for this cartridge is 254 mm (1 in 10 in), 6 grooves, Ø lands = 7.62 mm, Ø grooves = 7.82 mm, land width = 2.79 mm and the primer type is large rifle magnum.
According to the official C.I.P. guidelines the 7.62mm UKM case can handle up to 470 MPa (68,167 psi) piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers.[2]
This for rifles very high maximum allowed chamber pressure level indicates that the cases of the .300 and .338 Lapua Magnum and 7.62mm UKM are built extremely sturdy to cope with this for rifles very high operating pressure. The large boltface combined with the high 470 MPa maximum pressure makes that the 7.62mm UKM should only be chambered in rifles that are capable of handling such large and fierce cartridges and thus high bolt thrust safely. Chambering such powerful super magnum cartridges in rifles intended for normal magnum rifle cartridges and using 470 MPa loads can cause serious or fatal injury to the shooter and bystanders.
Additional information[]
The 7.62mm UKM’s main appeal is long-range shooting. Due to the large case capacity in relation to the 7.62 mm (.308 inch) calibre bore size the 7.62mm UKM is harsh on barrels. The 7.62mm UKM typically wears out a rifle barrel in 750 to 1500 rounds. A lot of thorough barrel cleaning (after every 5 to 10 shots) and carefully avoiding long strings of shots help to minimize barrel wear.
The American .300 Dakota proprietary cartridge, based on the .404 Jeffery case, is probably the closest currently (2008) commercially available ballistic twin of the 7.62mm UKM.[3][4] The .300 Dakota is however a rebated rim cartridge.
See also[]
References[]
- C.I.P. CD-ROM edition 2003
- C.I.P. decisions, texts and tables (free current C.I.P. CD-ROM version download (ZIP and RAR format))
External links and sources[]
- QuickLOAD internal ballistics predictor computer program for fire arms