.41 Remington Magnum
Type Revolver
Place of origin 22x20px United States
Production history
Designer Elmer Keith / Bill Jordan
Designed 1964
Manufacturer Remington Arms
Case type Rimmed, straight
Bullet diameter .410 in (Bad rounding hereScript error mm)
Neck diameter .434 in (Bad rounding hereScript error mm)
Base diameter .434 in (Bad rounding hereScript error mm)
Rim diameter .492 in (Bad rounding hereScript error mm)
Rim thickness .060 in (Bad rounding hereScript error mm)
Case length 1.290 in (Bad rounding hereScript error mm)
Overall length 1.590 in (Bad rounding hereScript error mm)
Rifling twist 1-18½ in
Primer type Large pistol
Ballistic performance
Bullet weight/type Velocity Energy
170 gr (Bad rounding hereScript error g) JHP1,871 ft/s (Bad rounding hereScript error m/s)1,320 ft·lbf (Bad rounding hereScript error J)
210 gr (Bad rounding hereScript error g) JHP1,567 ft/s (Bad rounding hereScript error m/s)1,160 ft·lbf (Bad rounding hereScript error J)
240 gr (Bad rounding hereScript error g) JHP1,327 ft/s (Bad rounding hereScript error m/s)940 ft·lbf (Bad rounding hereScript error J)
180 gr (Bad rounding hereScript error g) JHP1,494 ft/s (Bad rounding hereScript error m/s)890 ft·lbf (Bad rounding hereScript error J)
Test barrel length: 6.5" Revolver
  • Ballistics by the inch[1]

Introduced in 1964 by the Remington Arms Company, the .41 Remington Magnum is a center fire firearms cartridge primarily developed for use in large-frame revolvers intended for hunting and law enforcement purposes.

Development Edit

In 1963, Elmer Keith and Bill Jordan, with some help from Skeeter Skelton, petitioned Smith & Wesson, Remington, and Norma to produce a pistol and ammunition in .41 caliber which would fall between the extant .357 Magnum and .44 Magnum cartridges in ballistic performance, and at the same time address perceived shortcomings with those loads.[2]

The .357 Magnum suffered from restricted terminal ballistic effectiveness in the early 1960s, as jacketed hollow point bullets were not yet commonly available, and the manufacturer's standard loadings consisted of simple lead bullets. The powerful .44 Magnum, primarily a heavy hunting round, was considered overkill for police use, generating too much recoil for control under rapid fire. In addition, the revolvers chambered for the .44 were considered too large, bulky, and heavy for police carry.[2][3] Keith's original vision called for dual power levels in the .41, a heavy magnum load pushing a 210-grain (Bad rounding hereScript error g) JHP at a muzzle velocity of 1300–1400 feet per second (ft/s), and a milder police loading which was to send a 200-grain (Bad rounding hereScript error g) semiwadcutter downrange at around 900 ft/s.[2][3] These plans went awry due to an ongoing fascination in the firearms community with high-powered cartridges; Remington was swayed by its influence and instead of following Keith's blueprint chose to emphasize the performance of the new cartridge. As a result, the .41 "Magnum" load was released at an advertised 1500 ft/s, and even the "light" police loading was introduced with a 210 grain lead semiwadcutter "warmed up" to about 1,150 ft/s. Unfortunately, the police load as delivered was regarded as overpowered by most law enforcement agencies, many of whom were still using .38 Special revolvers.[2][3] Additionally, Smith & Wesson simply adapted their large N-frame revolvers for the new cartridge, which did not address size and weight concerns.[2][4] The Model 58, targeted for the law enforcement market, was introduced on July 10, 1964. Weighing in at 41 ounces, the Model 58 compared unfavorably with other popular revolvers available at the time, such as Smith's own 34 ounce Model 10 in .38 Special.[2] These combined factors mostly eliminated the .41 Magnum from consideration for its intended market as a law enforcement firearm, although it continued to be touted as such and was adopted by a few law enforcement agencies.[2][3] Smith & Wesson produced a high-end, premium revolver in .41 Magnum caliber, the Model 57, almost identical to the .44 Magnum-chambered Model 29.[2] Magnum Research's Desert Eagle division produced a .41 Remington Magnum in their semi-automatic Mark VII.

Market reception Edit

The .41 Magnum never enjoyed the popularity and success of either the .357 Magnum or .44 Magnum cartridges, but is still prized by handgun hunters as some feel it generates somewhat lighter recoil and slightly flatter bullet trajectory at long range than the .44.[5] Nevertheless, the .44 Magnum still catalogs a greater variety of heavier bullet weight offerings which are more effective on larger game, and boasts a slight edge in power when using the heaviest factory loads, or if pushed to the edge by handloading (heavier bullets or bullets of different types). Marshall and Sanow called the .41 Magnum "one of our most unappreciated calibers."[6]

See also Edit

References Edit

  1. Ballistics by the Inch Web Site. Accessed July 22, 2011. 6.5 inch barrel.
  2. 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 "Smith & Wesson's .41 Magnum", Free Patriot Web site. Accessed August 6, 2008.
  3. 3.0 3.1 3.2 3.3 Smith, Clint. "The .41 Mag: If only we could do it over", Guns magazine April 2005. BNET Web site. Accessed August 6, 2008.
  4. Taffin, John. "The .41 Magnum Turns 40 - The Sixgunner" American Handgunner magazine, Nov-Dec 2003. BNET Web site. Accessed August 6, 2008.
  5. "S&W Model 57", Notpurfect Web site. Accessed August 5, 2008.
  6. Script error

External linksEdit

Script error

Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.